3D Pinball Machine Wooden Puzzle For Adults

Easy to build, with clear instructions. Parts are generally quite sturdy with lots of spares. Works great, with flashing lights, music and scoring. Very pleased with finished item.

Intense model to build!
Don’t try this as your first wood model.
Pay CAREFUL attention to the pictures.
Two parts may look the same but have different numbers
If their numbers are different there is a reason.
Worked on it for about four months.
Averaged about 4 hours a week.
I added the paint and coloring to the unit.
It comes as just bare wood with many of the parts etched by the laser.

Works great!
It’s a challenge to place the ball on the ramps.
I did get the ball into the Alligator ramp for points.
It has circus music that plays, which is cute.
The music can be turned off by a switch.

This is my 4th or 5th ROKR kit, and it definitely does not disappoint! It takes a lot of time to put together, but if you follow the directions carefully, the results are amazing. I didn’t expect a fully working pinball machine, but that is what this kit makes. Really fun to put together, and really fun to play with!

Loved building this!
If you love the feeling of accomplishment and enjoy that old school feel of classic pinball, this is a must!
+ Must have patience (took me about 22 hours to build at a relaxing pace).
+ Must have a gentle touch (several pieces are fragile, super glue is a must have just in case but there are spare pieces).
+ Lastly, must have patience and attention to detail as you go along.
— I wish the power cord was at least double its length.
— I wish a plexiglass piece was included to cover the play
* Consider painting the pieces before completion.

I enjoyed putting this together . This is my fourth product from them and was by far the most challenging. The assembly took me several days with no more than 2-3 hrs a day. It has been fun to play with. Although the instructions are pretty clear , you need patience and small narrow fingers as shown in the videos. Otherwise take your time. Not sure why the music on off switch is underneath the front panel instead of being on the side or back. Would be easier to switch it on and off. Now on to the next one.

This was the funnest thing to build. Best advice is to take time. Go slow. Test the flippers before you close up the bottom. Have fun

It was relatively easy to put together. Took me a little over 14 hours. Looks great and high quality.

I purchased this to do something different with my spare time. This was so much fun to built and my kids love playing with it.

This took longer to put together mainly because I painted most pieces before assembling them. I enjoyed the entire process.

I recieved this 3D pinball puzzle for Christmas!
It took me 4 days to build with only one major mishap!
It does come with some extra peice just in case things get out of hand! I think I'm a pretty good builder, but I did have one key peice break on me during the build and there wasn't a extra!
The good thing is the peice is out of sight and doesn't affect the puzzles operation!
My only issue is the short USB cord that came with the puzzle!
I have purchased a 10 ft USB extension cord but the sensors, the sound or the power button for the sound doesn't work as well as the original USB cord that is provided with the puzzle! Which can be a bit annoying!
Other then this it is a great machine to have on hand!
I agree with all the other reviews when they say if you have never builded anything before, do not try your hand at this!
The details of the puzzle are amazing!
The cool thing is it can be used with or without power!
This is a great puzzle/pinball machine to have if you like to build and like to own your own pinball machine!
Now I own my own pinball machine and I builded it myself!

This model is stunning. The design is perfect. Even down to the detail that the screwdriver is magnetised so the tiny screws are easier to install.
Firstly if it’s your first time building one of these wooden models I’d try something smaller and less expensive to begin with.
ROKR have designed a great model / toy. The instructions are crystal clear. The only blip is that when you first assemble the flippers they look like they’re facing the wrong way but as you progress in the build they will then be pointing down rather than up. So it would help if the instructions mentioned that to avoid confusion. I found the flippers to be the trickiest because they have to spring back easily to the “rest” position. If they don’t then something is not quite right. Mine didn’t flip back initially and I did have to take them apart. My mistake was pushing part P50 slightly too far onto part O7 which stopped it moving freely. Once I’d rectified that it worked perfectly.

I got it for Xmas and just finished it. Follow the instructions closely, start by organizing the MANY parts and take your time and have patience and you'll have a lot of fun (I started by getting familiar with the instruction book, the way the parts are bagged and numbered, used magic marker to mark "A, B, C" etc. on all the wood parts boards, and stacked them alphabetically against the table). Get comfortable, take your time, use lots of light, and ignore those who claim to have assembled it in 8-15 hrs. It was very theraputic, too. Reminded me of my younger days making model airplanes.
The only real problem I had was getting the 4mm brass screws started in the angle brackets on the underside.
I DO wish they would have included a 5 Volt, 2 Amp P.S. with it. Until I find a suitable PS, I'll have to use one of the USB ports on my laptop. (Video- I could only use one hand. The other was holding the phone).